Easy to ignore but simple and important tire changer maintenance knowledge.Maintenance must be regular and ensure corrected operation, as follows:
1. Clean the machine every day, remove the ordure in the clamping guiding groove and grease lubrication.
2. Check the Oil pot 2-3times everyday. Ensure the oil level inside higher than the oil pot of the suction pipe.
3. Must be filled with the lubricating oil of viscosity 2.5 ° – 7 ° E under the temperature of 50 °C.
4. Check the dose of the lubricant, a drop of lubrication should be dropped Into the oil pan observing glass window after running the pedals two or three times, if necessary, just adjust the dose screw.
5. Periodically draining water from the water container in the filter, this step is done by counterclockwise ring from the locking action, and there should be separated the machine from the compressed air system every month and clean the water collection in the filter device.
6.At least once a year to clean the bearings, guides and other parts of the dust and dirt just to keep the surface smooth.
7.Annually clean with commercial lubrication maintenance to painting on connecting screws and latches, bearing points, guides, tighten device and other parts.
8. Notice when clean up the glass observation windows only can by water, oil or gasoline (mustn’t by gasoline from petrol stations )
Jun-29-2018
admin
