The first pit: no protective tape
When the tires are removed, as soon as the big plate turns, don’t go directly to the steel rim and give him the steel rim
The second pit: no lubricating paste
Especially when loading tires, be sure to apply lubricating paste to avoid scratching wounds
The third pit: no avoidance valve
When disassembling tires, especially in the second layer, regardless of whether there is a tire pressure sensor, you must develop the habit of avoiding the valve, if you accidentally dismantle it, not to mention losing money, customers will dare to come to your store next time to consume?
The fourth pit: the outer support tires
Many people also want to be convenient, but there are a lot of bad things about this, one will stretch out the mark on the inside of the tire, and the other is that the tray is easy to loosen when the air pressure is insufficient, if the inner clamp is used, there will be no such problems, so don’t be afraid of trouble
The fifth pitfall: the light focus is not right
There will be a yellow dot and a red dot on the top of the new tires, the yellow dot is the lightest, the red dot is the heaviest, the yellow dot must be aimed at the valve, so that you stick the balance weight less, and you won’t be so shaky when you run
The sixth pit: the hexagonal shaft is not pressed down into place, it is locked, and there is still a long distance from the edge of this steel ring. The correct way is to press the bird’s head downwards with force, or use this auxiliary arm to press the tire down on the top, and then align the bird’s head, so that it is not easy to scrape the wound
The seventh pit: the front and back are not distinguished, the outside is the front of the tire, the inside is the reverse side of the tire, and the outside is facing outward, otherwise, it will affect the drainage performance of the tire
Guangdong Roadbuck Electromechanical Equipment Co., Ltd.: After 20 years of precipitation and development, ROADBUCK disassembly and assembly machine, wheel balancing machine and wheel aligner products have a complete range of products. Moreover, it has MAXCARL auto maintenance mall, which can provide professional supporting services for various auto repair and maintenance service enterprises. The disassembly machine focuses on tilt and discless series, the wheel balancing machine focuses on automatic measurement, and the wheel aligner focuses on diagnostic services. Therefore, consumers are positioned in professional wheel protection service centers, and professional users who have quality requirements for products.
Brand Website https://www.roadbuck3d.com/
MAXCARL Auto Maintenance Mall website
0757-86600197
Mar-27-2025
admin
